Sharp GX-BT180

EN
What is included in the box:
• 1 x Main unit GX-BT180
• 1 x USB Cable
• 1 x AUX In Cable
• 1 x User manual
Panels & Controls
1. Power – short press to power on/off
2.
– Bluetooth Indicator
3.
– Battery Indicator
4. Aux in Jack 3.5mm – Aux in cable
supplied
5. MicroUSB Charge slot – USB cable
supplied
6.
Volume up – Short press
Skip forward button - Long press
7. ► Play/Pause – Click to play/pause,
Double Click for SIRI/GOOGLE.Click to
answer/end, Double Click to reject call.
8.
– Microphone
9.
Volume down – Short press
Skip backward button - Long press
Getting started
Power on/off
Short press
button to power on/off the
speaker.
The indicator light will  ash blue.
The speaker has a memory function and
when powered will enter the same mode
as prior to power off . Each time the speaker
powers on it will reset to 50% volume.
After 10 mins with no activity/connection
the GX-BT180 will automatically power off
to conserve battery.
Charging
Please use the supplied Micro USB cable
to charge the GX-BT180. A full charge
will take around 3 hours. Please close the
port cover after you have charged the
GX-BT180.
Modes
Bluetooth Mode
A. Pairing
Power on the speaker and enter
Bluetooth mode. The light indicator
will  ash. On your smartphone search
Bluetooth devices for the “SHARP
GX-BT180”. Once connected the
speaker will announce it is “connected”
and the indicator light will cease
 ashing.
B. Music
► Click to play/pause
Click to increase volume
press and hold for 1.5 seconds to
skip forward a track
Click to decrease volume
press and hold for 1.5 seconds to
skip back a track
C. Calls
► Click to answer an incoming call
► Click to end the active call
► Double click to reject an incoming
call or press and hold
D. SIRI/GOOGLE
► Double click to activate/cancel Siri/
Google voice dialing.
E. Disconnect
► Press and hold to disconnect the
current Bluetooth connection. The
GX-BT180 will prompt “disconnected”.
Then other Bluetooth devices can  nd
and pair with the GX-BT180.
8 / 70 7 / 68 8 / 70