Sharp GX17 - Network

106 Settings
To Change the Position of a Network in the
Preferred List
“Settings”
→ “Network” → “Select Network” → “Set
Preferred”
1. Select the name of the network to change the
position in the list.
2. Select “Insert” or “Add to end”.
To Delete a Network from the Preferred List
“Settings”
→ “Network” → “Select Network” → “Set
Preferred”
1. Select the name of the network you wish to delete.
2. Select “Delete”
WAP/MMS/Email Settings
Note
• In normal operation, you do not need to change
settings.
WAP Settings (*: Item to be set is mandatory)
“Profile Name”*: WAP profile name (Unique name)
“IP Address”*: IP address for WAP
“Homepage”: Homepage
“Port Number”*: Security option (1024-65535)
“Circuit Prompt” : Circuit prompt (“Enable” or
“Disable”)
“Connection Type” :
Bearer connection type (“GPRS
Then CSD”, “GPRS” or “CSD”)
“GPRS Settings”:
“APN”*: Access point name
“Username”: User name
“Password”: Password
“Linger Time”: Linger time (0-99999 sec.)
“CSD Settings”:
“Phone No.”*: Access point number
“Line Type”: Line type (“ISDN” or “Analogue”)
“Username”: User name
“Password”: Password
“Linger Time”: Linger time (0-99999 sec.)