Sharp GX17 - Selecting the Picture Size

Camera 39
Using the Zoom Function
Press c or d to change the zooming ratio.
Zooming ratio indicators
: Magnification.
Note
• When “Picture Size” is set to “S (120
∗ 160)”, the
zoom function has 3 magnifications (
× 1, × 2, × 4).
• When “Picture Size” is set to “M (240
∗ 320)”, the
zoom function has 2 magnifications (
× 1, × 2).
Selecting the Picture Size
“Camera”
→ “Take Picture” → [Options] →
“Picture Size”
1. Select the desired picture size.
Selecting the Picture Quality
“Camera”
→ “Take Picture” → [Options] →
“Picture Quality”
1. Select “Normal” or “Fine”.
Picture quality indicators
:Fine
:Normal
Selecting the Anti-flicker Mode
“Camera”
→ “Take Picture” → [Options] → “Anti-
flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
• Vertical stripes may occur on the picture due to the
light source. Change the anti-flicker mode to rectify.
• The digital camera uses a C-MOS sensor. Although
this camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a hot place for a long
time before taking or registering a picture, the
picture quality may be poor.