E-14
General control
Take out the earbuds from the charging
case. They will automatically power on
and auto reconnect via Bluetooth to the
last device paired.
Notes:
• When the left (L) or right (R) earbuds
are taken out for the first time, it will
enter pairing mode. Turn on your
bluetooth device and search for “HP-
TW30 SHARP”
• If the earbuds are not turned on,
touch and hold both L and R MFB
pad for about 2 seconds.
To power off:
• Place the earbuds back into the
charging case. It will turn off
automatically and disconnect the
Bluetooth connection.
• Touch and hold L or R MFB pad for
more than 5 seconds.
The earbuds will automatically power
off if there is no bluetooth connection
between the bluetooth source device
and the earbuds for more than 5
minutes.
■ Power on ■ Power off
HP-TW30 - En with Fr IC statement.indd 14 11/9/2020 9:26:51 AM
To Next Page
Loading...
