Sharp HT-SB140(MT) User Manual

•
EN
Bluetooth Operation
Pair Bluetooth-enabled Devices
The  rst time you connect your Bluetooth
device to this player, you need to pair
your device to this player.
NOTE:
 The operational range between this
player and a Bluetooth device is
approximately 8 meters (without any
object between the Bluetooth device
and the unit).
 Before you connect a Bluetooth device
to this unit, ensure you know the
device’s capabilities.
 Compatibility with all Bluetooth de-
vices is not guaranteed.
 Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
 If the signal strength is weak, your
Bluetooth receiver may disconnect,
but it will re-enter pairing mode
automatically.
1. While in ON mode, press the
(Bluetooth) button on the remote
control or on the unit to select
Bluetooth mode. The Blue indicator
will light  ash.
2. Activate your Bluetooth device
and select the search mode.
“SHARP HT-SB140” will appear on your
Bluetooth device list.
 If you cannot  nd the unit, press and
hold the
button on the remote cont-
rol to be searchable. After the “Pairing”
voice prompt and the Blue indicator
will  ash rapidly.
3. Select “SHARP HT-SB140” in the pairing
list. After the “Paired” voice prompt,
the system is successfully connected
and the Blue indicator will light up
solidly.
4. Begin playing music from the
connected Bluetooth device.
To disconnect the Bluetooth function,
you can:
 Switch to another function on the unit.
 Disable the Bluetooth function on
your device.The device is successfully
disconnected from the unit after the
“Disconnected” voice prompt.
 Press and hold the
button on the
remote control.
TIPS:
• Enter „0000“ for the password if
necessary.
• If no other Bluetooth device pairs with
this player in 2 minutes, the player will
reconnect to the previous connection.
• The player will also be disconnected
when your device is moved beyond the
operational range.
• If you want to reconnect your device
to this player, place it within the opera-
tional range.
• If the device is moved beyond the
operational range, when it is brought
back, please check if the device is still
connected to the player.
• If the connection is lost, follow the
instructions above to pair your device
to the player again.
Listen to Music from Bluetooth
Device
 If the connected Bluetooth device
supports Advanced Audio Distribution
Pro le (A2DP), you can listen to the
music stored on the device through the
soundbar‘.
 If the device also supports Audio Video
Remote Control Pro le (AVRCP), you
can use the soundbar‘s remote control
to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it
supports A2DP).
3. Use supplied remote control to control
play (if it supports AVRCP).
EN

Sharp HT-SB140(MT) Specifications

General

Brand	Sharp
Model	HT-SB140(MT)
Category	Home Theater System
Language	English