Sharp HT-SB200 - Chapter 1. General Description; AC Power Supply Cord and AC Plug Adaptor; Specifications

HT-SB200
–2
CHAPTER 1: GENERAL DESCRIPTION
[2] Specifications
[1] AC Power Supply Cord And AC Plug Adaptor
CAUTION : “Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type”.
QACCEA002AW00
QACCLA002AW00
QPLGA0004AWZZ
QACCZA002AW00
QACCZA007AW00
QACCZA018AW00
General
(*) This power consumption value is obtained when in the
power stand-by mode.
Power source DC IN 12V 4A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption
Power on: 10 W
Power stand-by: 0.6 W (*)
Output power Front speaker:
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Subwoofer:
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
Speaker 2.1-way Speaker System
Front Speakers: 38 mm (1-1/2") Full Range
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Audio output
terminals
Speakers: 12 ohms / Channel
Subwoofer: 3 ohms
(12 Ohms x 4 parallel connections)
Input terminals Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Dimensions Width: 800 mm (31-1/2")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 1.75 kg (3.86 lbs.)
1 – 1