Sharp HT-SB250 User Manual

E-15
Specications
As part of our policy of continuous improvement, SHARP reserves the right to make design and
specication changes for product improvement without prior notice. The performance specica-
tion gures indicated are nominal values of production unit. There may be some deviations from
these values in individual unit.
Power
source
DC IN 12V 4A: AC/DC
adaptor
(AC 100 - 240 V ~ 50/60
Hz)
Power
consumption
10 W
Maximum
output
power
32 W
Speaker 2.1-way Speaker System
Front Speakers: 1-1/2”
(40 mm) Full Range
Impedance: 12 ohms /
Channel
Subwoofer: 2-1/4” (57 mm)
Woofer (x4)
Impedance: 3 ohms
General■
Input
terminals
Analog input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analog input (LINE 2):
Stereo mini jack Ø 3.5 mm
100 mV / 47 kohms
Dimensions Width: 33-1/2” (851 mm)
Height: 3-3/4” (96 mm)
Depth: 2-3/4” (70 mm)
Weight 4.19 lbs. (1.90 kg)
Error indicators and warnings
When you fail to perform operations properly, the following messages are displayed on
the unit.
Display Meaning
or or
Malfunction of the surround circuit. Place the unit
away from noise source and plug the AC power
cord into another AC outlet. (*)
●
Power indicator (blinks red)
When the protection circuit of the amplier is
activated.
●
(*): Should the same message appear even if the unit is unplugged and plugged in or is
set to the stand-by mode and on again, contact your local dealer where you purchased
the unit.

Sharp HT-SB250 Specifications

General

Brand	Sharp
Model	HT-SB250
Category	Speakers
Language	English