2
• Users are requested to use existing return facilities for used equipment
and batteries.
CE Statement:
• Hereby, UMC Poland Sp. z o.o. declares that this audio device is in com-
pliance with the essential requirements and other relevant provisions of
RED Directive 2014/53/EU. The full text of the EU declaration of conform-
ity is available by following the link
https://www.sharpconsumer.eu/documents-of-conformity/
Marking
Manufacturer declares that the design and manufactureing of this product
complies with the european directives for CE marking as stated below:
2014/35/EU (LVD)
2014/30/EU (EMC)
2011/65/EU (RoHs)
2017/53/EU (RED)
Trademarks:
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG,. Inc.
The terms HDMI and HDMI High-De nition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing,
LLC in the United States and other countries.
Dolby, Dolby Atmos, and the double-D symbol are registered trademarks
of Dolby Laboratories.
What’s in the Box
• Main Unit
• Remote Control
• Wireless Subwoofer
• EU AC Power Cord (2 pcs)
• UK AC Power Cord (2 pcs)
• Audio Cable 3.5mm to 3.5mm
• HDMI Cable
• Wall Brackets (2pcs)
• Wall mounting Screws
• User manual
• Quick Start Guide
• Warranty lea et
Design and speci cations are subject to change without notice.
Panels & Controls
Main Unit
1. Display Window – Show the current status.
2. Remote Control Sensor – Receive signal from the remote control.
3. Wall bracket screws
4.
(ON/OFF) button – Switch the unit between ON and Standby mode.
5.
(SOURCE) button – Select the play function.
6. – Play/pause/resume playback in Bluetooth/USB mode.
Press and hold to activate the pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth device.
7. VOL+/VOL- buttons – Increase/decrease the volume level.
8. AC~ Socket
9. COAXIAL Socket
10. OPTICAL Socket
11. USB Socket – Insert the USB device to play music.
12. AUX Socket – Connect to an external audio device.
13. HDMI (1/2/ARC) Sockets – Connect to a TV via HDMI cable.
Wireless Subwoofer
1. AC~ Socket – Connect to power.
2. PAIR button – Press activate the pairing function between the main
unit and the subwoofer.
3. PAIR Indicator – Light up solidly when the pairing succeed.
Remote Control
1. – Switch the unit between ON and STANDBY mode.
2. – Select the Bluetooth mode.
Press and hold to activate the pairing function in Bluetooth mode or
disconnect the existing paired Bluetooth device.
3.
– Select the play function.
4. SURR – Turn the surround ON/OFF.
5. HDMI – Select the HDMI 1/2/ARC mode.
6. VOL +/- – Increase/decrease the volume level.
7. / – Skip to previous/next track in Bluetooth/USB mode.
8. – Play/pause/resume playback in Bluetooth/USB mode.
9. – (MUTE) Mute or resume the sound.
10. BASS +/- – Adjust bass level.
11. TRE +/- – Adjust treble level.
12. EQ – Select a preset sound mode.
To Next Page
Loading...
