Sharp IG-BC2E Plasmacluster Ion

ENGLISH
E-5
Connecting the car adapter and installing the unit
INSTALLATION GUIDANCE
Remove the fi lter cover.
1
Filter cover
Remove
Insert the car adapter's unit
connection plug securely into
the unit power input terminal.
2
Route the cord in one of the ways
shown in the diagram, according
to the place of installation, then
attach the fi lter cover.
3
Cord
Use one
of these
routes.
Filter cover
Attach
Upper
Bottom
• Be careful the cord does not get
caught in the fi lter cover.
IG-BC2E.EN.indd7IG-BC2E.EN.indd7 2009/12/2513:48:222009/12/2513:48:22