Sharp IG-DC2E - Main Unit; Plasmacluster Ion Generating Unit; Plasmacluster Ion Generating Unit Replacement

ENGLISH
E-11
How to replace Plasmacluster Ion Generating Unit
Remove the fi lter
cover and pull
out the plug for
connecting the
main unit
1
1
2
Filter
cover
Remove
Filter
cover
Attach
With a
coin or
other item
Plasmacluster
Ion Generating
Unit
Unscrew the screw
that fi xes the
Plasmacluster Ion
Generating Unit
and remove it
2
Attach a new
Plasmacluster Ion
Generating Unit and
fi x it with a screw
Connect the plug for
connecting the main
unit and attach the
fi lter cover
Insert the cigar plug in the cigar lighter socket and check
the Unit Replacing Light is turned OFF
3
4
5
• After the replacement, you may feel the sound “Zi, Zi ...”(sound generated by
Plasmacluster ion) become larger, however, you feel it because the Plasmacluster
Ion Generating Unit is replaced with a new one. It is not a failure.
IG-DC2E.EN.indd13IG-DC2E.EN.indd13 2012/04/0513:08:282012/04/0513:08:28