Sharp IG-DC2E - English; Table of Contents

ENGLISH
ENGLISH
Thank you for purchasing this SHARP Plasmacluster Ion Generator.
Please read this manual carefully before using Plasmacluster Ion
Generator.
After reading, keep the manual in a convenient location for future
reference.
E-1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
...............
E-2
• WARNING
...............................................................
E-2
• CAUTIONS CONCERNING OPERATION
......................
E-3
PARTS NAME
........................................................
E-4
• MAIN UNIT • CONTROL PANEL/DISPLAY
..........................
E-4
• BACK/ACCESSORIES
........................................................
E-4
INSTALLATION GUIDANCE
........................................
E-5
OPERATION
......................................................................
E-7
CLEANING AND MAINTENANCE
.............................
E-8
• FILTER
.................................................................................
E-8
• MAIN UNIT
...........................................................................
E-8
• PLASMACLUSTER ION GENERATING UNIT
....................
E-9
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
..
E-10
REPLACING THE FUSE
..............................................
E-12
SPECIFICATIONS
..........................................................
E-12
TROUBLESHOOTING
..................................................
E-13
• While IG-DC2E/IG-DC2B can remove suspended viruses
and other contaminants, it cannot create a completely sterile
environment. SHARP does not guarantee its ability to prevent
microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-DC2E/IG-DC2B
will need to be replaced periodically*
.
• The unit is designed for ordinary passenger cars with DC 12V batteries.
It cannot be used in vehicles with DC 24V batteries (buses, trucks, etc.).
* Replacement is required approximately every 6 years (17,500 hours) when
operated 8 hours a day. IG-DC2E/IG-DC2B will stop operating after about
6 years and 6 months (19,000 hours) if the Plasmacluster Ion Generating
Unit is not replaced.
IG-DC2E.EN.indd3IG-DC2E.EN.indd3 2012/04/0513:08:242012/04/0513:08:24