Sharp IG-DC2E - Replacing the Fuse; Specifications

E-12
REPLACING THE FUSE
HOW TO REPLACE
SPECIFICATIONS
*1 It is the index of capacity that approximately 25,000 ions blown out to the air can
be measured at the point near the center of the space (0.5m height from floor)
when the air volume is "HIGH" by placing this product at the place supposing a cup
holder beside the driver's seat.
*2
Space corresponding to a cabin measuring 1.5 (width) x 2.4 (depth) x 1.0 (height) meters
* Some specifi cations may be changed for improvement purposes.
Model
Rated voltage
Applicable interior volume
*
1
Operation mode
Power consumption
Ion density
Operating noise level
Outer dimensions
Weight
DC12V
Approx.
3.6 m
3
*
2
1.1W 1.8W
23dB
Approx. 270g (Not including car adapter)
IG-DC2E / IG-DC2B
HIGHLOW
Turn the tip of the cigar plug and remove it.
1
5A glass
tube fuse
New fuse
Insert the new fuse, then
reassemble as before.
2
• Be sure to replace with a 5A glass tube
fuse (commercially available).
29dB
Cylindrical, 76 mm upper section diameter / 65 mm lower section
diameter x 150 mm height (Not including car adapter)
ACCESSORIES
Car Adapter / Operation manual
2.7W
TURBO
33dB
Approx. 7,000 ions/cm
3
Approx. 25,000 ions/cm
3
Approx. 50,000 ions/cm
3
IG-DC2E.EN.indd14IG-DC2E.EN.indd14 2012/04/0513:08:292012/04/0513:08:29