Sharp IG-DC2E - Installation Guidance

ENGLISH
E-5
Connecting the car adapter and installing the unit
INSTALLATION GUIDANCE
Remove the filter
cover.
1
1
2
Filter
cover
Remove
Insert the car adapter's unit
connection plug securely into
the unit power input terminal.
2
Route the cord in one of the ways
shown in the diagram, according
to the place of installation, then
attach the fi lter cover.
3
Cord
Use one
of these
routes.
Hook
Insert it from
lower side
Attach
Upper
Bottom
• Be careful the cord does not get
caught in the fi lter cover.
Insert the cigar plug into the
cigar lighter socket.
4
• Be sure to remove any dirt from the
cigar lighter socket. Failure to do so
could cause faulty contact or fi re.
Cigar
plug
Cigar lighter
socket
Lock
part
IG-DC2E.EN.indd7IG-DC2E.EN.indd7 2012/04/0513:08:252012/04/0513:08:25