EN-12
FILTER
The filter must be cleaned regularly in order to maintain the ion
density. Filter soiling depends on the usage environment, so clean
the filter frequently as necessary. With frequent cleaning,
Plasmacluster ions can be released efficiently.
1.
Remove the Filter Cover.
• See step 1 of “DISASSEMBLING”
on page 10.
2.
Remove the filters.
3.
Remove dust with a vacuum
cleaner.
• If the filter is dirty, simply wash
with water.
NOTE
• Do not press the vacuum cleaner strongly against the filter, or
the filter could be damaged.
• If using synthetic kitchen detergent, rinse well to remove all
traces of the detergent. Also, be sure to dry the filter in the
shade.
• Dry the product in a shaded area so that water drops do not
remain in the gap between the Filter Cover and the filter.
Frequently as necessary
MAIN UNIT
Wipe with a dry soft cloth.
<For Stubborn Dirt>
Use water and a mild detergent. And then, wipe with a wet
cloth. Make sure to dry out the Main Unit.
Every month or more often if necessary
OM_IG-NX2_EN_MS_VT_CS.indb EN-12OM_IG-NX2_EN_MS_VT_CS.indb EN-12 31/5/2564 BE 16:5031/5/2564 BE 16:50
To Next Page
Loading...
Need help?
General
