Sharp IG-NX2E - Specifications

EN-17
ENGLISH
SPECIFICATIONS
Model IG-NX2E
Power Car Adapter
Rated input DC 12 V
Rated output DC 5 V (Max. 2 A for 2 ports)
Operation mode LOW MED TURBO
Power consumption 0.6 W 0.8 W 1.4 W
Ion density
Approx.
25,000
ions/cm
3
Approx.
50,000
ions/cm
3
Approx.
90,000
ions/cm
3
Operating noise level 18 dB 25 dB 33 dB
Outer dimensions
Upper dimension: 78 × 76mm
Lower dimension: Φ 65 mm
Height: 165 mm
(Excluding accessories)
Weight Approx. 295 g (Excluding accessories)
Capacity applicable for
high-density
Plasmacluster *
1
Approx. 3.6 m
3
*
2
* 1 It is the index of capacity that approximately more than 50,000
ions blown out to the air can be measured at the point near the
center of the space (0.5 m height from floor) when the air
volume is “MED” by placing the product at the place supposing
a cup holder beside the driver's seat.
* 2 Space corresponding to a cabin measuring 1.5 (width) x 2.4
(depth) x 1.0 (height) metres.
• Some specifications may be changed for improvement purposes.
OM_IG-NX2_EN_MS_VT_CS.indb EN-17OM_IG-NX2_EN_MS_VT_CS.indb EN-17 31/5/2564 BE 16:5031/5/2564 BE 16:50