EN-6
INSTALLATION GUIDANCE
Insert the Car Adapter into the accessory socket and
connect the USB plug to the Car Adapter.
• You can use the product by inserting the
included USB cable into USB connector of
PC, etc.
NOTE
• Be sure to remove any dirt from the accessory socket. Failure to
do so could cause faultily contact or fire.
• The Car Adapter (accessory) for the product has 2 USB ports.
It is possible to connect another equipment of 1.5 A or lower
while the product is connected. However, in this case, the normal
operation of the additional equipment is not guaranteed.
• The Car Adapter and/or connecting section could be hot while in
use and/or right after use.
OM_IG-NX2_EN_MS_VT_CS.indb EN-6OM_IG-NX2_EN_MS_VT_CS.indb EN-6 31/5/2564 BE 16:5031/5/2564 BE 16:50
To Next Page
Loading...
Need help?
General
