Sharp IQ-9200 - EEPROM WRITING VERIFICATION AND END PROCESS; Verifying EEPROM Writing; End Process Steps

OZ-9600 II
IQ-9200
@ Check that the following display appears in the screen of the
OZ-7200/1Q-7300M.
<DIAG> -
PWB CHECK
KEY CHECK
LCD CHECK
PRODUCT CHECK1
PRODUCT CHECK2
RAM DATA SET
RAM DATA CHECK
@ Press the reset switch of the OZ-7200/IQ-7300M to execute the
card (IQ-8B03) to which data have been written. Check that the
following display appears in the screen.
MODEL ERROR
© Procedure 7: End process
@ Turn off the OZ-7200/1Q-7300M.
@ Turn off the PC-4600. :
@® Remove the card (1Q-8B03) from the OZ-7200/IQ-7300M.
* Perform writing into the EEPROM of the OZ-9600II/IQ-9000/
1Q-9200 with the card in order to check that writing can be
performed properly.
List of the versions
| ate Flopy Disk Version Mask ROM Version EEPROM Version EEPROM SUM
mm/dd/yyyy 0.0 O10»: F.O OOOO
04/12/1993 3.5 3.0 3.5 4404
-25-