Sharp KD-GCB7S7PW9-BX User Manual (English)

Questions and Answers:

J
Joan YoungAug 16, 2025
Why does my Sharp Dryer take so long to dry?
- J
  James ReyesAug 16, 2025
  The drying process of your Sharp Dryer might be prolonged due to several reasons. The lint filter or the condenser might be clogged, so try washing the filter with lukewarm water or cleaning the condenser. Also, ensure the ventilation grills are open to prevent the room temperature from rising too much. A layer of limescale on the humidity sensor, overloading the dryer, or insufficiently spun laundry can also cause this issue. Clean the humidity sensor, avoid overloading the dryer, and select a higher spin speed on your washing machine.
D
David EwingAug 22, 2025
What to do if my Sharp KD-GCB7S7PW9-BX Dryer won't start?
- M
  Mark JonesAug 22, 2025
  If your Sharp Dryer won't start, there are a few things to check: * Ensure that the dryer is properly plugged into the socket. * Make sure that the loading door is completely closed. * Verify that you have set a program and pressed the Start/Pause key, ensuring it's not in Standby (Pause) mode. * Also, check if the child lock is active and deactivate it if necessary.
K
kellymillerAug 25, 2025
Why is the filter cleaning and condenser warning symbols flashing on my Sharp KD-GCB7S7PW9-BX?
- M
  Mr. Michael BentonAug 26, 2025
  If the filter cleaning and condenser warning symbols are flashing on your Sharp Dryer, it could be due to a few reasons. The filter seat might be clogged by lint, there might be a layer causing obstruction on the surface of the lint filter, or the condenser might be clogged. Try cleaning the filter seat, washing the filter with lukewarm water, and cleaning the condenser.
M
Mr. Joe GonzalezAug 27, 2025
What to do if the programme has been interrupted for no reason on my Sharp KD-GCB7S7PW9-BX?
- M
  Michael CruzAug 27, 2025
  If the program on your Sharp Dryer has been interrupted, ensure that the loading door is properly closed. There might have been a power failure, so press the Start/Pause key to restart the program. Also, the water tank might be full, so empty the water tank.
M
Mary PierceAug 30, 2025
Why is the water tank warning symbol on my Sharp KD-GCB7S7PW9-BX Dryer?
- N
  Nicole WilkinsAug 30, 2025
  If the water tank warning symbol is on or flashing on your Sharp Dryer, it could be because the water tank is full, so you should empty it. If the product is connected directly to the water outlet, check the water discharge hose, as it might be bent.
B
Brandi MannSep 1, 2025
Why do clothes have shrunk in my Sharp KD-GCB7S7PW9-BX?
- M
  Martin SosaSep 1, 2025
  If your clothes have shrunk, felted, or deteriorated after drying in your Sharp Dryer, the selected program may not be suitable for the type of laundry. Check the care labels on your laundry items and select a suitable program for the type of laundry.
M
Morgan GarciaSep 4, 2025
Why is the filter cleaning warning symbol on my Sharp Dryer?
- A
  Ashley HughesSep 4, 2025
  If the filter cleaning warning symbol is on your Sharp Dryer, it indicates that the lint filter might be unclean. Clean the filter to resolve this issue.
P
Peter TurnerSep 7, 2025
Why is the condenser cleaning warning symbol on my Sharp KD-GCB7S7PW9-BX Dryer?
- W
  washingtontheresaSep 7, 2025
  If the condenser cleaning warning symbol is illuminated on your Sharp Dryer, it means that the condenser might be unclean. Clean the condenser.
E
elewisAug 19, 2025
What to do if laundry comes out damp from my Sharp KD-GCB7S7PW9-BX Dryer?