HOTEL MODE FUNCTION
To reset the Hotel mode, please follow the steps below.
1. Press the MENU---> 0027button on the remote control.
2. The Hotel mode setting menu will appear.
3. Using the UP/DOWN button on the remote control, select the RESET.
4. Using the LEFT/RIGHT button on the remote control, please select "OK".
Then press the ENTER button.
5. The setting items has now been returned to initial value.
Setting of the maximum volume value.
set the mode to desired setting.
The Hotel mode has now been set up.
To set the Hotel mode, please follow the steps below.
Press the MENU---> 0027 button on the remote control.
The Hotel mode setting menu will appear.
Using the UP/DOWN button on the remote control,
select the desired mode. Then press the ENTER button.
Using the LEFT/RIGHT button on the remote control,
1.
2.
3.
FUNCTIONInitial value
100
Setting value
0~100
4.
Maximum volume
Setting item
5.
Effective/invalid setting of main key operation. (*Note 1)
Effective/invalid setting of Menu key operation of set and remote control.
(*Note 1)
Note 1) Even if setting it to "No Respond", the service mode function are effective.
Note 2) If setting it to "OFF", it start up in same input source when you turn off the power before.
Reset Various settings of the Hotel mode function return initial State.
All Channel 1
HDMI/PC/DVD/
OFF
Channel Number Channel Number tuned when starting this product can be set.
RESPOND
OFF
To Next Page
Loading...
Need help?
General
