17
Simple operations for watching a TV program
POWER
indicator
POWER (On/Standby)
Turning on the power
Press POWER on the TV, or POWER on the remote
control unit.
• POWER indicator (Green): The TV is on. (After a few
seconds, a window appears with sound.)
• The initial setup starts when the TV powers on for the fi rst
time. If the TV has been turned on before, the EZ Setup will
not be invoked. See page 26 for performing EZ Setup from
the Setup menu.
Turning off the power
Press POWER on the TV, or POWER on the remote
control unit.
• The TV enters standby and the image on the screen
disappears.
• The POWER indicator on the TV turns off.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when POWER
is turned off.
Watching TV
POWER
TV status indicator (POWER)
Off Power off, Standby mode
“Off” is selected in OPC setting
“On” or “On: Display” is selected in OPC setting
Lights off
Lighting (Green)
TV status indicator (OPC)
• See page 27 for details.
OPC indicator
Green
The TV is on
POWER
(On/Standby)
To Next Page
Loading...
Need help?
General