53
Using the kitchen remote control unit
Alarm set
Press KITCHEN TIMER/CLOCK SET/
ALARM repeatedly until ALARM ON icon on
LCD fl ashing.
Press MIN/HOUR repeatedly to set hour
portion of ALARM.
With in 30 seconds, press SET/STOP to
confi rm settings.
Press SEC/MIN repeatedly to set minute
portion of ALARM.
1
2
3
4
After ALARM set, LCD display will be showing
as below.
5
ALARM ALARM
• If there is no operation during setup within 30 seconds,
ALARM set procedure will be cancelled automatically.
• When beeper sounds, press SET/STOP to stop beeper
sound and set ALARM icon off.
You can set the timer to automatically turn on the TV.
When time reaches ALARM set value, switch
the TV power on or enters standby and make
beeper sound about 30 seconds, then ALARM
icon on LCD goes out.
After displaying above information for about 5
seconds, LCD returns to clock display again
as below.
6
7
Alarm off
The ALARM set can be cancelled.
Press KITCHEN TIMER/CLOCK SET/
ALARM repeatedly until ALARM OFF icon on
LCD fl ashing.
1
ALARM ALARM
Within 30 seconds, press SET/STOP to
cancel ALARM set and LCD returns to normal
clock display as below.
2
• If there is no operation during setup within 30 seconds,
ALARM
reset procedure will be cancelled automatically.
• The initial value of
ALARM
is 12:00 AM.
• The
ALARM
set is valid only one time.
Backlight
Press LIGHT, backlight goes on for about 5 seconds
and then goes out.
To Next Page
Loading...
Need help?
General