14
Turning On and Off the Main Power
● Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
A
• The On-screen display disappears after a few seconds.
● To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
POWER indicator
POWER
Basic Operation
Switching the Input Modes
(INPUT1/INPUT2/TV)
Turn on the power of the connected video equipment.
Press INPUT (
)/( ) to select the applicable input
source. The screen changes in order of INPUT1,
INPUT2 and TV mode each time INPUT is pressed.
A
• INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT2 :
Used for video equipment connected to the INPUT2 terminal.
The S-video input terminal is additionally provided for the
INPUT2. If both the S-video terminal and normal video
terminals are connected with cables, the S-video input
terminal takes priority.
1
INPUT2
INPUT1 (COMPONENT) mode
INPUT2 mode
TV mode
2
INPUT1
480P
STEREO
SAP
MONO MONO 11:53AM
2
On-screen display
2
LC-20SH4U_E_P13-21.p65 04.12.9, 4:19 PM14
To Next Page
Loading...
Need help?
General