Sharp LC-32LE340E - Page 69

LC-32LE340/343
LC-40LE340/343
Dimming pin sholud be high or square wave in open position. If it is low, please check S32 fo BRCM
side and pnael or power cables, connectors.
49
STBY_ON/OFF_NOT should be high for standby condition, please check R203.
B. CI Module Problem
Problem: CI is not working when CI module inserted.
Possible couses: Supply, suply control pin, detect pins, mechanical positions of pins.
69
LC-32LE340/343
LC-40LE340/343