LC-32LE345T
5 – 1
CHAPTER 5. ADJUSTMENT
[1] ADJUSTMENT
1. Entering and cancel the adjustment process mode
1) While holding down the INPUT and Volume DOWN keys at the same time, plug in the AC cord to turn on the power. (“K” standing for inspec-
tion process mode is displayed on the upper left position of the screen.)
2) Press the Channel DOWN and Volume DOWN keys at the same time. (The adjustment process mode screen appears.)
3) To cancel it, turn off the power using the Power switch or remote control.
2. Remote controller key operation and description of display in adjustment process mode.
1. key operation
* Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
Remote controller key Main unit key Function
CH ( / )
CH ( / )
Changing channel (UP/DOWN)
VOL (+ / –) VOL (+ / –) Changing volume (UP/DOWN)
Cursor ( / )
—————— Turning a page (PREVIOUS/NEXT)
Cursor ( / )
—————— Changing a selected line setting (+10/-10)
INPUT button on remote con-
troller
INPUT button Input source switching ( toggle switching)
(TV-DAV-1/SAV-1 AV-2 COMPONENT HDMI PC)
ENTER —————— ——————
3. Software upgrading
1) Make sure LCD TV is on.
2) Insert USB device to the USB terminal at the LCD TV.
(Make sure the latest software is installed in the USB device.)
3) Use below menu procedure to start upgrading software version :
• -Menu •Setup •Software Update (USB)
• - Are you sure? • Yes
4) A few second later, the software upgrading will start automatically.
Software Update (USB)
1%
II
I
To Next Page
Loading...
Need help?
General