EasyManuals Logo
Home>Sharp>TV>LC-32LE700UN

Sharp LC-32LE700UN User Manual

Sharp LC-32LE700UN
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
42
Appendix
Removing the Stand
Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching the stand
Before performing work, make sure to turn off the TV.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
To attach the stand, perform the above steps in reverse order.
Unfasten the four screws used to secure the stand in
place.
Detach the stand from the TV. (Hold the stand so it
will not drop from the edge of the base area.)
12
Detach the cable clamp on the rear of the TV when using the optional mount bracket.
To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
Setting the TV on the Wall
CAUTION
This TV should be mounted on the wall only with the wall mount bracket AN-37AG5 (SHARP). The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
You can ask a qualifi ed service professional about using an optional AN-37AG5 bracket to mount the TV on the wall.
Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG5
wall mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
0/5/10/15/20°
The center of the display:
1
9
/
64
inches (29.0 mm) under
the “A” position.
Refer to the operation manual
of AN-37AG5 for details.
Vertical mounting Angular mounting
LC-32LE700UNE.indb42LC-32LE700UNE.indb42 2009/06/2312:29:302009/06/2312:29:30

Table of Contents

Other manuals for Sharp LC-32LE700UN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-32LE700UN and is the answer not in the manual?

Sharp LC-32LE700UN Specifications

General IconGeneral
BrandSharp
ModelLC-32LE700UN
CategoryTV
LanguageEnglish

Related product manuals