Sharp LC-32WD1E/S/RU - Chapter 5 Adjustment Procedures; Software Upgrade and Troubleshooting

5 - 1
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
CHAPTER 5. ADJUSTMENT PROCEDURES
[1] UPGRADING SOFTWARE
[1.1] File types and Hardware/Software Requirements
[1.2] Time Requirements
File Type Hardware Software
All Upgrades • Controlling PC
(running Microsoft® Windows®)
• Television
• Power cable
• Remote control
• Latest software package and
release notes
Analogue • UOC/GTV application
(.hex)
• PNX application(s) (.mi)
• PNX config files (.cfg)
• PNX EEPROM (.eeprom)
• Service PCB
• Jumper
• Aardvark tool
• USB cable
• ServUpdtArdV_vx_x.exe
Application for controlling the
update
• FTD2XX.*
Drivers for Aardvark tool
Digital • ST/Futarque DTV (.bin) • PCMCIA Compact Flash (CF)
adapter
• CF memory card
UOC eeprom • This software should never be upgraded. This device is written (initialized) automatically during the installa-
tion procedure at first power-on.
Image Time required
Analogue +/- 8 minutes
/gtv_flash.hex +/- 40 seconds
/bffs0/app.mi +/- 440 seconds
/bffs0/dsw.mi +/- 150 seconds
/bffs0/gamma.cfg +/- 4 seconds
/bffs0/hdcp.cfg +/- 4 seconds
/bffs0/profile.cfg +/- 4 seconds
/PNX Eeprom +/- 10 seconds
Digital +/- 120 seconds