Sharp LC-32WD1E/S/RU - Public Mode Operations

5 - 8
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
[3] ENTERING THE PUBLIC MODE MENUS
1. On the remote control, press MENU.
•The TV Menu screen displays.
2. Enter the PIN code “3001”.
• Using the number keypad, press 3, then 0, then 0, and then 1. (Each button in the sequence must be pressed
immediately after the button before it or the television will not recognize the entry code.)
[4] REMOTE CONTROL KEY OPERATION IN PUBLIC MODE
[4.1] Remote Control Key Operation
[5] PUBLIC MODE SETTINGS
[6] ENTERING THE SERVICE MENUS
1. On the remote control, press MENU.
•The TV Menu screen displays.
2. Enter the PIN code “1147”.
• Using the number keypad, press 1, then 1, then 4, and then 7. (Each button in the sequence must be pressed
immediately after the button before it or the television will not recognize the entry code.)
Note:
Depending on the Public Mode settings, the TV Menu screen may not be visible when Public Mode is
activated. To open the Public Mode menu, the user still needs to open the TV Menu (which remains hidden)
and enter “3001”.
Remote
Control Key Function / Remark
S/T
Press to move up and down and select the desired item.
W/X
Press to change the setting of the selected item.
END Press to exit the service menus.
Item Available Settings and Description
Power On Fixed
Variable — The TV will go into standby mode when is pressed.
Fixed — The TV will not go into standby mode when is pressed.
Maximum Volume [Range] — The volume level specified here is the maximum volume level for the TV.
Volume Fixed Variable — The sound volume is not fixed.
Fixed — The sound volume is fixed to the level set in “Volume Fixed Level”.
Volume Fixed Level [Range] — The volume level specified here is the fixed volume level for the TV.
RC Button Respond — The TV will respond when buttons are pressed on the remote control.
No Respond — The TV will not respond when buttons are pressed on the remote control.
Panel Button Respond — The TV will respond when buttons are pressed on the panel / keypad.
No Respond — The TV will not respond when buttons are pressed on the panel / keypad.
Menu Button Respond — The TV will respond when Menu and DTV Menu are pressed.
No Respond — The TV will not respond when Menu and DTV Menu are pressed.
On Screen Display On — The on screen display menus will behave normally.
Off — The on screen display menus will not display.
Input Mode Start [Variable] — When the TV is turned on, the TV will start-up in this input mode.
Input Mode Fixed On — The input mode is fixed to the mode set in “Input Mode Start”.
Off — The input mode is not fixed.
Reset Resets the Public Mode settings to the factory defaults.
Public Mode On — The TV will follow the settings specified in the Public Mode menu.
Off — The TV will ignore the settings specified in the Public Mode menu.