Sharp LC-32WD1E/S/RU - Chapter 4 Removing of Major Parts; Remove Major Parts LC-32 WD1 E;S;RU and LC-32 WT1 E

4 - 1
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVE MAJOR PARTS LC-32WD1E/S/RU AND LC-32WT1E
1. Remove the 4 lock screws (1). Detach the Stand.
2. Remove the 7 lock screws (2). Remove the 10 lock screws (3). Detach the Rear Cover.
3. Remove 4 lock screws (4). Detach Wall Mount Bracket (Top).
4. Remove 4 lock screws (5). Detach Wall Mount Bracket (Bottom).
5. Disconnect cable (X012). Remove 2 lock screws (6) and detach Key Unit Plate.
6. Remove 2 lock screws (7) and detach Key Unit.
7. Disconnect cable (X0208). Remove 1 lock screw (8). Detach Side I/O.
8. Remove 2 lock screw (9). Detach Side I/O PBA.
9. Disconnect cable (X021). Remove 1 lock screw and washer (10). Detach Speaker R.
10. Remove 4 lock screws (11). Detach Speaker from Speaker Box.
11. Disconnect cable (X022). Remove 1 lock screw and washer (12). Detach Speaker L.
12. Remove 4 lock screws (13). Detach Speaker from Speaker Box.