EasyManua.ls Logo

Sharp LC-32WD1E/S/RU - Page 52

Sharp LC-32WD1E/S/RU
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No audio output during UHF/VHF reception
Is the set unmuted?
no
press the "mute" on the remote
v yes
Is the volume set to "50"
no
press the "volume up" on the remote
until volume is "50"
v yes
Are headphones disconnected from the set?
no
remove the headphones plug from the set
v yes
Is the antenna properly connected?
no
Connect according to manual
v yes
Is audio signal sent from D013 (TDA15134)?
Check R0155 and R0158
no
Is the audio signal (SIF) sent to D013
Check Z010-4 and Z010-5
yes
Check +8V_TV(C019) and +5V_TV(C01113)
and periferal circuit
v no
Is the audio signal (SIF) sent from the Tuner U011?
Check U011-8
yes
Check circuitery of SAW filters (Z010 and
Z011)
v no
Check 5V_tuner, AGC and I2C signals
Fixed?
v no
Replace tuner
v yes
Is audio signal sent from D020 (TDA8932)?
Check D020-27/30 and D020-19/22
no
Check +28V_audio and other D020 circuitery
v yes
Is audio signal on X022 and X021 normal
no
Check connectors
v yes
Check speakers and wiring
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
6-21

Related product manuals