-12-
1. Press MENU button to display the MENU screen,
and then press
buttons to select "PICTURE".
2. Press buttons to select the following picture
options and then press OK.
3. Press
buttons to adjust each option’s
setting.
4. Press MENU button to return to the previous
menu.
5. Press EXIT button to exit the menu.
• Picture Mode
There are 4 picture modes: Standard, Mild, User
and Dynamic. You can only adjust the picture
effect when “User” mode is selected.
Note: Tint is available in NTSC system only.
• Color Temperature
There are 4 color temperature modes: Cool,
Medium, Warm and User. You can only adjust the
color components when “User” mode is selected.
• Aspect Ratio
Selects the aspect ratio: Auto/Full/4:3.
• Noise Reduction
Selects the noise reduction level: Off / Low /
Middle / High.
• Screen (VGA mode)
Screen is available in VGA mode only. You can
adjust horizontal position, vertical position, size
and phase here.
• Energy Saving
There are 5 energy saving modes: Off / Low /
Standard / Middle / High.
• Dynamic Enhance Level
Press OK button to select dynamic enhance level:
Off / Low / Middle / High.
Note:
Press RED button to store the channels after
manual tuning.
• Program Edit
You can delete, rename, skip or assign any
programs as your favorite channels.
RED (Delete)
Press RED button, the highlighted channel will be
deleted.
GREEN (Rename)
Only ATV channels can be renamed. Move the
cursor to the channel, press GREEN button to
rename the channel.
Press buttons to choose the character. Press
buttons to move the cursor. Press MENU
button to exit edit. Press EXIT button to exit menu.
Note: ATV channels name can only contain 5
characters.
YELLOW (Move)
Press YELLOW button and then press
buttons
to move to the selected channel. Press
YELLOW button to conrm.
BLUE (Skip)
Press buttons to choose the channels, press
BLUE button to skip this channel. The “ ” will
show on the right side of the channel.
Choose the skipped channel, press BLUE button
again, you can cancel the skip, the “ ” will
disappear.
FAVORITE
Press buttons to choose the channel, press
FAV button, it will show “ ” on the right side of
the channel.
Choose the FAV channel, press FAV button again,
you can cancel the FAV, “ ” will disappear.
Once your favorite group is created, you can press
FAV button to quickly access your favorite channel
list.
• Signal Information
Press OK button to view the signal information (for
DTV mode only).
OPERATION
To Next Page
Loading...
Need help?
General