V
S
U
T
NOTE
• "MENU" options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
• Items in darker grey cannot be selected.
Menu operation
1
3
2
What is the menu?
• You need to call up the OSD to perform settings for the TV. The OSD for the settings is called "MENU".
• The "MENU" enables various settings and adjustments.
• The "MENU" can be operated with the remote control unit and with the TV panel control keys.
Common operations
Operation without a remote control unit
(with the TV panel control keys)
About the Guide Display
The Guide Display at the top of the screen shows the
menu bar.
The Guide Display at the bottom of the screen shows
the operations with the OSD.
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
This function is useful when there is no remote control
unit within your reach.
1 Press MENU to display
initial MENU screen, or
to return to previous
MENU screen.
2 Press CHr/s instead of a/b or ik/l
instead of c/d to select the item.
3 Press b to open a new MENU level or accept the
setting
NOTE
• The “MENU” screen will disappear if left unattended for
several seconds.
1 Picture 4 Time 7 Settings
2 Audio 5 Lock
3 Multimedia 6 Channels
18
Display the menu
screen
Exit the menu
screen
Select an item
Press MENU and the “MENU”
screen displays.
The operation will exit the "MENU"
screen if you press END before it is
completed.
Press a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
Press MENU to return to the previous
"MENU" page.
E Selecting in the menu
E Selecting options
To Next Page
Loading...
Need help?
General