You can display the channel information that you are
watching at this moment by pressing p on the remote
control unit.
Information that appears on the screen:
Program number
Program name
Age classification
Audio
Available Services: Radio / Teletext /
Subtitles / Encripted
Information about the program which is
being broadcast
Basic adjustment
Channel list
Selecting the channel
you want to watch
Channel information display
(DTV/CADTV only)
1 Press OK and the list of tuned channels will be
displayed.
2 Use ▲/▼ to select the channel you want to watch
and press OK.
CLEARING THE PIN
If you lose or forget your PIN, you can clear the PIN
following these steps:
1 Go to «MENU»→«LOCK».
2 Enter “3001” to cancel out the current PIN.
The current PIN is reset to “3001”.
4 Press ◄ to select Yes and press OK. The
software update will start
•The updated percentage appears.
5 When software update finishes, remove the USB
memory and press Ok to reset the TV.
6 Return to Settings < Product information
menu to check that the version has been updated
successfully.
To Next Page
Loading...
Need help?
General