Enjoying 3D image viewing
Configuring the TV settings to
enhance 3D image viewing
You can adjust the brightness of the TV for 3D image
viewing.
1 Press 3D button while you are viewing 3D image.
2 Press
b to
select 3D Brightness and press OK.
3 To adjust de brightness press a/b to choose
between the options.
Item
High
The screen brightens
Medium
Low
The screen dims
NOTE
• The "Backlight" adjust is not available for 3D image.
• In 3D mode some display settings may not be available.
Display format for 3D and 2D images
Image for input signals Selectable mode Description
3D mode
(using the 3D
glasses)
3D
• 3D images Auto mode.
Side by Side
• Creates 3D images from 3D images displayed side
by side. The image is split into a left and right image,
and then the images are stretched and displayed
sequentially to create a 3D image.
Top and Bottom
• Creates 3D images from 3D images displayed
on the top and bottom. The image is split into a
top and bottom image, and then the images are
stretched and displayed sequentially to create a 3D
image.
2D mode
(without using
the 3D glasses)
Side by Side s 2D
• Creates 2D images from 3D images displayed
side by side. Only the left image is stretched and
displayed. The image does not appear in 3D.
Top and Bottom s 2D
• Creates 2D images from 3D images displayed on
the top and bottom. Only the top image is stretched
and displayed. The image does not appear in 3D.
Recharging the 3D glasses battery
When the battery power is low, the LED light blinks one
time per second. If the 3D glasses battery runs out,
you can recharge the 3D glasses battery by connecting
the USB-mini USB cable, supplied with glasses,
to any
of the TV set side USB terminals or any other proper
source.
When the LED light goes off, the recharge is complete.
37
USB
(HDD)
To Next Page
Loading...
Need help?
General