32
LC-50LB261U Sharp 50" LED TV
www.sharpusa.com
Connecting external speakers or a sound bar
You can connect external speakers or a sound bar to the digital audio jack.
Digital audio
1 Make sure that your TV’s power cord is unplugged and the external speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL AUDIO OUTPUT jack on the back of your TV and
to the optical AUDIO IN jack on the external speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the external speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the external speaker system or sound bar.
5 On your TV, set the Digital Audio Out option on the SOUND menu to PCM. See “Adjusting sound settings” on
page 52.
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
External speaker
system
Digital optical audio cable
Back of TV
Sound bar
To Next Page
Loading...
Need help?
General