Sharp LC-42LB261U - Adding or Changing a Channel Label; Checking the Digital Signal Strength

57
LC-42LB261U Sharp 42" LED TV
www.sharpusa.com
Adding or changing a channel label
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press T
or ENTER. The CHANNELS menu opens.
3 Press
S or T to highlight Channel Edit, then press
ENTER. The CHANNELS · CHANNEL EDIT screen
opens with the channel number field highlighted.
4 Press
S or T to select the channel you want to
label, then press
X to move to the channel label
field.
5 Press
S or T to select a character, then press W or
X to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11 characters.
6 When you have completed the label, press ENTER.
7 Press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press T
or ENTER. The CHANNELS menu opens.
3 Press
S or T to highlight Signal Strength, then
press ENTER. The Signal Strength screen opens
showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.