Sharp LC-42LB261U - Selecting a CEC-Compatible Device; Opening a CEC-Compatible Devices Root Menu

46
LC-42LB261U Sharp 42" LED TV
www.sharpusa.com
Selecting a CEC-compatible device
When you have more than one INlink-compatible
device connected, you can select the device you want
to use.
1 Press INPUT, press
S or T to highlight an HDMI
input, then press ENTER.
2 Press MENU. The on-screen menu opens.
3 Press
W or X to highlight SETUP, then press T or
ENTER. The SETUP menu opens.
4 Press
S or T to highlight CEC, then press ENTER.
The SETUP · CEC menu opens.
5 Make sure that the CEC Control option is turned
on. See “Turning CEC Control on or off” on
page 43.
6 On the SETUP · CEC menu, press
S or T to
highlight Connect, then press ENTER. A list of
HDMI CEC-compatible devices you have
connected opens.
7 Press
S or T to highlight the HDMI
CEC-compatible device you want to connect to,
then press ENTER.
8 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Opening a CEC-compatible device’s root
menu
You can open a CEC-compatible device’s root menu,
then use your TV’s remote control to control the
device, if the device has this feature.
1 Press INPUT, press
S or T to highlight an HDMI
input, then press ENTER.
2 Press MENU. The on-screen menu opens.
3 Press
W or X to highlight SETUP, then press T or
ENTER. The SETUP menu opens.
4 Press
S or T to highlight CEC, then press ENTER.
The SETUP · CEC menu opens.
5 Make sure that the CEC Control option is turned
on. See “Turning CEC Control on or off” on
page 43.
6 On the SETUP · CEC menu, press
S or T to
highlight Root Menu, then press ENTER. The
device’s root menu opens, and you can use your
TV’s remote control to control the device.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.