Sharp LC-42LB261U - Page 43

38
LC-42LB261U Sharp 42" LED TV
www.sharpusa.com
13 Press S or T to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take several
minutes.
B If you select Cable, a message asks if you
have a cable box:
• Select No, then press ENTER if no cable box
is connected. Your TV scans for available
channels. The scan may take several minutes.
• Select Ye s , then press ENTER if a cable box is
connected. A message asks how you
connected the cable box to your TV.
• Select HDMI, Component, or AV, then
press ENTER if you connected a cable box
to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using a
coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.