Sharp LC-42LB261U - Page 60

55
LC-42LB261U Sharp 42" LED TV
www.sharpusa.com
B If you select Cable, a message asks if you have
a cable box:
•Select No, then press ENTER if no cable box
is connected. Your TV scans for available
channels. The scan may take several minutes.
•Select Ye s , then press ENTER if a cable box is
connected. A message asks how you
connected the cable box to your TV.
•Select HDMI, Component, or AV, then
press ENTER if you connected a cable box
to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
•Select Coaxial, then press ENTER if you
connected a cable box to your TV using a
coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
C If you select Satellite Box, a message asks how
you connected the satellite box to your TV:
• Select HDMI, Component, or AV, then press
ENTER if you connected a satellite box to
your TV using one of these cables. Read the
message, then press ENTER to close the
wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using a
coaxial cable. Read the message, then press
ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.