Using the Remote Control Unit
QUICK REFERENCE
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects
between the remote control unit and the remote control sensor may prevent proper operation.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
■ Cautions regarding the remote control
unit
• Do not expose the remote control unit to
shock. In addition, do not expose the remote
control unit to liquids, and do not place in an
area with high humidity.
• Do not install or place the remote control unit
under direct sunlight. The heat may cause
deformation of the remote control unit.
• The remote control unit may not work
properly if the remote control sensor on the
TV is under direct sunlight or strong lighting.
In such cases, change the angle of the
lighting or the TV, or operate the remote
control unit closer to the remote control
sensor.
INPUT
2
10
30º 30º
30º
30º
17´ (5 m)
Remote control
sensor
To Next Page
Loading...
Need help?
General