Sharp LC-52LE920UN - Page 15

LC-52LE920UN/LC-60LE920UN
. Removing of MAIN Unit, POWER Unit, Woofer, Stand Angle, 52” LCD Panel Module Unit.
Remove the 7 lock screws @ and detach the MAIN Unit @. >
UF
Remove the 2 lock screws @ and detach the Terminal Cover (Bottom) ®.
Remove the 2 lock screws © and detach the Terminal Cover (Side) ©.
Remove the 6 lock screws @ and detach the POWER Unit ©.
Remove the 4 lock screws @ and detach the Sub Woofer @.
Remove the 1 lock screw @ and detach the LCD Fixing Angle (Bottom-R) @.
Remove the 2 lock screws @ and detach the LCD Fixing Angle (Top-L) @.
Remove the 2 lock screws @ and detach the LCD Fixing Angle (Top-R) @.
eo
ON Oa
PF
Ww
ND
(
(
Remove the 2 lock screws @ and detach the LCD Fixing Angle (Bottom-L) ®.
10.Remove the 2 lock screws @ and detach the LCD Fixing Angle (B-MA) @.
11.Remove the 2 lock screws @ and detach the LCD Fixing Angle (B-MB) @.
12.Remove the 8 lock screws @ and detach the Stand Angle @
13.Remove the 3 lock screws @ and detach the BL Support Angle @.
14.Remove the 6 lock screws @ and detach the 52” LCD Panel Module Unit @.
LCD Fixing Angle &@ ©, ©
(Top-L) Y
(16) LCD Fixing Angle
(Top-R)
MAIN Unit
& POWER
,
Unit
*5
TERMINAL
Cover
Q
BL
Support
x=
a
mage
TERMINAL
Cover
“B)!|
(Bottom)
@
52" LCD Panel
Module Unit
LCD
Fixing
Angle
ixi
: _(2)LCD Fixing Angle
Bottom-L
(Bottom-L)
|
(Bottom-R)
A
i é 20).c01 mma pop “1
OD
a
(B-MA)
Hee)
LCD
Fixing
Angle
(B-MB)