Sharp LC-52LE920UN User Manual

LC-52LE920UN/LC-60LE920UN
2.3. Monitor microprocessor software version upgrade
Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version
upgrade’.
Copy the file HLI2ZBxxx.USB and HLNIMxxx.BIN (named temporarily) for monitor microprocessor software version upgrade to the USB memory.
2.3.1 How to upgrade the software
1. Plug AC cord and turn on the TV.
2. After picture displayed, touch the power key for 5seconds.
NOTE: Picture will disappear when you touch the power key, but keep touching it.
3. When the center icon LED blinks, release your finger from the power key.
4. Next, touch the “POWER’ key with the “CH (“~.)” key touching.
5. When the center icon LED turns on, release your finger form the keys.
CAUTION: + The moment this operation is done, the upgrading of the monitor microprocessor software starts. While the upgrade is ongoing, never
power off the unit. Otherwise the upgrade will fail and the system may be serious damaged beyond recovery (inability to start).
+ After the monitor microprocessor software is upgraded, also perform the ‘Industry Init’.
6. After the unit startup, the upgrade starts. The power led will blink continuously. Also, an upgrade screen will be shown during a minor upgrade.
MAIN
Soe ee
PANEL EEPROM |
eg ee
Be ee ee.
De eee
7. \f the upgrade fails, power led will stop blinking. Also, the upgrade failure screen will be shown if upgrade screen was shown at 5.
eS
SUB MICOM
eee eae
oe oe
SUB MICOM Version
eee eee
NOTE: In the event of a transient failure, upgrade will be automatically retried up to three times. If the process repeatedly fails, hardware may be the
cause.
8. The upgrade success screen will be shown if upgrade screen was shown at 5.
ae
Soe ee
eee
eee.
cee ee eee
PANEL EEPROM
9. Unplug the AC cord and remove the USB Memory for version upgrade.
10.Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the mon-
itor microprocessor software version information and panel size information.

Sharp LC-52LE920UN Specifications

General

Brand	Sharp
Model	LC-52LE920UN
Category	TV
Language	English