EasyManuals Logo

Sharp LC-60EQ10U User Manual

Sharp LC-60EQ10U
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
>>
<<
Using a PC
ENG 8-2
Setting Audio Input
Audio Select
This function sets the terminal to output the computer audio.
The adjustment items vary depending on the input source. Select the input source corresponding
to the terminal connected to the PC and then adjust the desired item.
To perform the operation, refer to "Setup" > "Advanced" > "Audio Select".
PC IN
Video: Select this when the TV and PC are connected using an analog RGB cable and the audio
is not input.
Video+Audio: Select this when the TV and PC are connected using an analog RGB cable and
the audio is input via a Ø 3.5 mm stereo minijack.
HDMI 2
HDMI(Digital): Select this when the TV and PC are connected using an HDMI-certified cable and
audio is input via the same cable.
HDMI+Analog: Select this when the TV and PC are connected using a DVI-HDMI conversion
cable and the audio is input via a Ø 3.5 mm stereo minijack.
NOTE
When "Audio Select" is set to "HDMI(Digital)", sound will not be produced if you use only an
HDMI-certified cable to connect HDMI-compatible equipment. To produce sound, you should
make an analog audio connection.
If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set
"Audio Select" to "HDMI(Digital)".

Table of Contents

Other manuals for Sharp LC-60EQ10U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-60EQ10U and is the answer not in the manual?

Sharp LC-60EQ10U Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal60 \
Display brightness- cd/m²
Native aspect ratio16:9
LED backlighting typeEdge-Lit LED
Contrast ratio (dynamic)8000000:1
3DNo
Audio input4
Teletext function-
Analog signal format systemNTSC
Digital signal format systemATSC
RMS rated power20 W
Number of speakers2
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards802.11a, 802.11b, 802.11g
Product colorBlack
Panel mounting interface400 x 400 mm
AC input voltage110 - 240 V
AC input frequency60 Hz
Power consumption (standby)- W
Package depth249 mm
Package width1522 mm
Package height946 mm
Package weight36500 g
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)372 mm
Height (with stand)861 mm
Weight (with stand)28000 g
Depth (without stand)77 mm
Width (without stand)1379 mm
Height (without stand)445 mm
Weight (without stand)25000 g

Related product manuals