EasyManuals Logo

Sharp LC-60EQ10U User Manual

Sharp LC-60EQ10U
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
>>
<<
Using a PC
ENG 8-1
Adjusting the PC Image
You can adjust the position of the image input from a PC the settings with "Setup" > "Input
Settings" > "PC input".
Auto Sync. (for Analog PC Input Mode Only)
For automatically adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image." displays.
No: This function does not work.
NOTE
When "Auto Sync." is successful, "Completed" displays. If not, "Auto Sync." failed.
"Auto Sync." may fail even if "Completed" displays.
"Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is
moved while executing "Auto Sync.".
Be sure to connect the PC to the TV and switch it on before starting "Auto Sync.".
Fine Sync.
Ordinarily you can easily adjust the picture as necessary to change image position using "Auto
Sync.". In some cases, however, manual adjustment is needed to optimize the image.
H-Pos.: Centers the image by moving it to the left or right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical stripes.
Phase: Adjust when characters have low contrast or when the image flickers.
NOTE
For resetting all "Fine Sync." adjustment items to the factory preset values, press / to select
"Reset", and then press ENTER.
It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it
cannot be selected.
The default cursor position may not be in the center, because the screen position variable
ranges may be asymmetrical.
The screen position variable ranges depend on the View Mode or the signal type. The ranges
can be seen on the position-setting screen.

Table of Contents

Other manuals for Sharp LC-60EQ10U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-60EQ10U and is the answer not in the manual?

Sharp LC-60EQ10U Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal60 \
Display brightness- cd/m²
Native aspect ratio16:9
LED backlighting typeEdge-Lit LED
Contrast ratio (dynamic)8000000:1
3DNo
Audio input4
Teletext function-
Analog signal format systemNTSC
Digital signal format systemATSC
RMS rated power20 W
Number of speakers2
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards802.11a, 802.11b, 802.11g
Product colorBlack
Panel mounting interface400 x 400 mm
AC input voltage110 - 240 V
AC input frequency60 Hz
Power consumption (standby)- W
Package depth249 mm
Package width1522 mm
Package height946 mm
Package weight36500 g
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)372 mm
Height (with stand)861 mm
Weight (with stand)28000 g
Depth (without stand)77 mm
Width (without stand)1379 mm
Height (without stand)445 mm
Weight (without stand)25000 g

Related product manuals