Sharp LC-60LE651 MK2 User Manual

39
LC-60LE651 MK2
LC-60LE652 MK2
10. INPUT TV MODE PROGRAM NUMBER [1-999]
If value is “0”,
TV should start in the last program number selected by user if in the previous control
A
TV / DTV
is selected, this is the normal user TV behavior. If value is different from “0”, TV should starts in the specifi ed
program number when it is switched on.
11. INPUT MODE FIXED [VARIABLE ↔ FIXED]
“FIXED” has been selected, any channels and input modes other than those selected at the start mode cannot
be picked up.
12. RC PATH THROUGH [ON ↔ OFF] (Need additional Hardware)
When ON and RS-232 circuitry is really assembled , in pin #9 of RS-232 socket appears a feedback of the
remote signal (3.3v logic type).
13. HOTEL MODE [ON ↔ OFF]
If ON has been selected the HOTEL MODE is activated.
14. RS-232C POWER ON [ENABLE ↔ DISABLE] (Need additional Hardware)
When this option is set to “ENABLE” it means that TV should be able to be switched on from standby mode
through a RS232 command.
15. HDMI LEVEL POWER ON [ENABLE ↔ DISABLE] (Need additional Hardware)
Enabling this option, the polling of HDMI signal presence in a given HDMI input is being monitored.
[TV in ON mode] If there isn’t HDMI signal present, after some seconds TV should go to standby
[TV in standby mode] If there is HDMI signal present, TV should switch on.
16. COMMIT
Select Commit and press OK to apply the change.
17. RESET
Cancel all Public Mode settings. (It returns to the factory settings)
9.3. Public Mode Menu.
9. Public Mode (Hotel mode) ( continued )
Item Description Remarks (adjustment details, etc.)
PUBLIC MODE PUBLIC MODE Submenu Press ">" or "OK" to enter to PUBLIC MODE Submenu
1 Power On fi xed Variable Press ";" or "<" to change Variable/Fixed then press "OK"
2 Maximum volume 100 Enter number of maximum volume
3 Volume fi xed Variable Press ";" or "<" to change Variable/Fixed then press "OK"
4 Volume fi xed level 33 Enter number of maximum volume
5 RC button Respond Press ";" or "<" to change Respond/No respond then press "OK"
6 Panel button Respond Press ";" or "<" to change Respond/No respond then press "OK"
7 Menu Button Respond Press ";" or "<" to change Respond/No respond then press "OK"
8 On Screen Display Yes Press ";" or "<" to change Yes/No then press "OK"
9 Input mode start Normal Press ";" or "<" to change Normal/ATV/DTV/HDMI1.. then press "OK"
10 Input TV mode program
number
0 Enter number of program
11 Input mode fi xed Variable Press ";" or "<" to change Variable/Fixed then press "OK"
12 RC path through Off Press ";" or "<" to change On/Off then press "OK" (Need additional Hardware)
13 Hotel mode Off Press ";" or "<" to change On/Off then press "OK"
14 RS232C Power On Disable Press ";" or "<" to change Enable/Disable then press "OK" (Need additional
Hardware)
15 HDMI Level Power On Disable Press ";" or "<" to change Enable/Disable then press "OK" (Need additional
Hardware)
16 Commit Press "OK" to confi rm
17 Reset Press "OK" to return to factory settings

Sharp LC-60LE651 MK2 Specifications

General

Brand	Sharp
Model	LC-60LE651 MK2
Category	LCD TV
Language	English