Sharp LC-80LE650U - Page 55

LC-60/70/80LE650U/LE657U/C6500U/LE757U/LE857U,60/70LE755U/C7500U
4 – 32
4. Removing of LCD CONTROL Unit, MAIN Unit, POWER Unit, VESA Angle Ass'y and Stand Angle.
1. Remove the 2 Connecting Cords and 2 Ferrite Cores .
2. Remove the 6 lock screws and detach the LCD CONTROL Unit .
3. Remove the 8 lock screws and detach the Terminal Angle Side and Terminal Angle Bottom .
4. Remove the MAIN Unit .
5. Remove the 5 lock screws , 2 lock Screws and detach the POWER Unit now change to use 1 type screw.
6. Remove the 16 lock screws and detach the 4 VESA Angle Ass'y .
7. Remove the 12 lock screws and detach the 2 Stand Angles .
KD923WJ3
Part code
Ԣ
ԢԢ
Ԣ
ԤԤ
Ԥ Ԥ
ԤԤ
Ԝ Ԝ
ԜԜ
Ԝ
Ԝ
Ԝ
Ԝ
Ԡ
Ԛ
Ԡ
Ԡ
Ԡ
Ԡ
Ԧ
Ԧ
ԙFerrite Core
ԘConnecting Cord
ԛLCD
CONTROL
Unit
ԝTerminal Angle
Side
ԞTerminal Angle
Bottom
ԟMAIN Unit
ԡPOWER Unit
ԣ8'5##PING#UU[
ԣ8'5##PING
#UU[
ԣ8'5##PING
#UU[
ԣ8'5##PING
#UU[
5VCPF#PINGԥ
5VCPF#PINGԥ
ԥ5VCPF#PING