EasyManuals Logo

Sharp LC-90LE657U User Manual

Sharp LC-90LE657U
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
>>
<<
Using a PC
ENG 8-2
Setting Audio Input
Audio Select
This function sets the terminal to output the computer audio.
The adjustment items vary depending on the input source. Select the input source corresponding
to the terminal connected to the PC and then adjust the desired item.
To perform the operation, refer to "Setup" > "Advanced" > "Audio Select".
PC IN
Video: Select this when the TV and PC are connected using an analog RGB cable and the audio
is not input.
Video+Audio: Select this when the TV and PC are connected using an analog RGB cable and
the audio is input via a Ø 3.5 mm stereo minijack.
HDMI 2
HDMI(Digital): Select this when the TV and PC are connected using an HDMI-certified cable and
audio is input via the same cable.
HDMI+Analog: Select this when the TV and PC are connected using a DVI-HDMI conversion
cable and the audio is input via a Ø 3.5 mm stereo minijack.
NOTE
When "Audio Select" is set to "HDMI(Digital)", sound will not be produced if you use only an
HDMI-certified cable to connect HDMI-compatible equipment. To produce sound, you should
make an analog audio connection.
If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set
"Audio Select" to "HDMI(Digital)".

Table of Contents

Other manuals for Sharp LC-90LE657U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-90LE657U and is the answer not in the manual?

Sharp LC-90LE657U Specifications

General IconGeneral
Display diagonal90 \
Display brightness- cd/m²
Native refresh rate120 Hz
LED backlighting typeFull-Array
Supported video modes1080p
Contrast ratio (dynamic)8000000:1
Display diagonal (metric)228.64 cm
Screen format adjustments16:9
Supported graphics resolutions1920 x 1080 (HD 1080)
Motion interpolation technologyAquoMotion 240
3DYes
3D glasses quantity2
Tuner typeAnalog & digital
Analog signal format systemNTSC
Digital signal format systemATSC
RMS rated power20 W
DVI portNo
Headphone outputs-
HDMI ports quantity4
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in1
Wi-Fi standards802.11a, 802.11b, 802.11g
Smart modesGame
Lifestyle appsSkype
Number of OSD languages3
On Screen Display (OSD) languagesENG, ESP, FRE
Product colorBlack
Panel mounting interface600 x 400 mm
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)- W
Power consumption (typical)381 W
Package depth335 mm
Package width2237 mm
Package height1461 mm
Package weight92500 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)434 mm
Height (with stand)1243 mm
Weight (with stand)68000 g
Depth (without stand)116 mm
Width (without stand)2054 mm
Height (without stand)1211 mm
Weight (without stand)64000 g

Related product manuals