EasyManuals Logo

Sharp LC-90LE657U User Manual

Sharp LC-90LE657U
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
>>
<<
Appendix
ENG 11-2
Setting the TV on the Wall
Using an optional bracket to mount the TV
You can ask a qualified service professional about using an optional AN-52AG4 bracket to
mount the TV on the wall.
Carefully read the instructions that come with the bracket before beginning work.
CAUTION
This TV should be mounted on the wall only with the wall mount bracket AN-52AG4
(SHARP). The use of other wall mount brackets may result in an unstable installation
and may cause serious injuries.
Installing the TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no
responsibility for improper mounting or mounting that results in accident or injury.
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for
details.)
Hanging on the wall
AN-52AG4
LC-70UQ17U/LC-70TQ15U
The "c" position is at the center of the
display.
LC-70SQ17U/LC-70SQ15U/LC-70SQ10U/LC-
70EQ10
The canter of display : 7/16 inch (11mm)
above the "c" position.
LC-70LE650U/LC-70C6500U
The canter of display : 25/64 inch (10mm)
above the "c" position.
LC-60UQ17U/LC-60TQ15U
The "c" position is at the center of the
display.
LC-60SQ17U/LC-60SQ15U/LC-60SQ10U/LC-
60EQ10U
The canter of display : 1/4 inch (6mm)
above the "e" position.
LC-60LE650U/LC-60C6500U
The "e" position is at the center of the
display.
Refer to the operation manual of AN-52AG4
for details.
NOTE
The UQ and TQ series cannot be mounted on a wall at an angle.
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the product.
We recommend you to contact a technician for assistance when installing it.
SHARP is not responsible for any damage to the product or injury to yourself or others if you elect
to install the wall mount on your own.
CAUTION
Install your wall mount on a solid wall perpendicular to the floor.
When you want to attach the wall mount to surfaces other than plaster board, please
contact your nearest retailer/adviser for additional information. If you install the TV on a
ceiling or slanted wall, it may fall and result in severe personal injury. Always have two
people mount the TV on a wall.
NOTE
Due to the terminal configuration on this TV, when you wall-mount this model, make sure there
is enough space between the wall and the TV for the cables.
To use this TV mounted on a wall, remove the AC cord holder on the rear of the TV, and then
use the screws supplied with the wall mount bracket to secure the bracket to the rear of the
TV.

Table of Contents

Other manuals for Sharp LC-90LE657U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-90LE657U and is the answer not in the manual?

Sharp LC-90LE657U Specifications

General IconGeneral
Display diagonal90 \
Display brightness- cd/m²
Native refresh rate120 Hz
LED backlighting typeFull-Array
Supported video modes1080p
Contrast ratio (dynamic)8000000:1
Display diagonal (metric)228.64 cm
Screen format adjustments16:9
Supported graphics resolutions1920 x 1080 (HD 1080)
Motion interpolation technologyAquoMotion 240
3DYes
3D glasses quantity2
Tuner typeAnalog & digital
Analog signal format systemNTSC
Digital signal format systemATSC
RMS rated power20 W
DVI portNo
Headphone outputs-
HDMI ports quantity4
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in1
Wi-Fi standards802.11a, 802.11b, 802.11g
Smart modesGame
Lifestyle appsSkype
Number of OSD languages3
On Screen Display (OSD) languagesENG, ESP, FRE
Product colorBlack
Panel mounting interface600 x 400 mm
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)- W
Power consumption (typical)381 W
Package depth335 mm
Package width2237 mm
Package height1461 mm
Package weight92500 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)434 mm
Height (with stand)1243 mm
Weight (with stand)68000 g
Depth (without stand)116 mm
Width (without stand)2054 mm
Height (without stand)1211 mm
Weight (without stand)64000 g

Related product manuals