>>
<<
Watching TV
ENG 2-6
Initial Installation (Continue)
Connection using an ETHERNET cable:
Select "Wired" and press ENTER.
Confirm that the TV is properly connected with the
router, and then press "Next". Follow the instructions on
the display to perform the connection test.
Wireless LAN connection by the WPS method:
Select "Wireless" and press ENTER.
Follow the instructions on the display, and finalize the
connection after testing its viability.
NOTE
After you finish configuring the network settings,
configure the "TV Name Setting", "Remote Control
App",and "Samba TV" settings.
(See page 4-26, 8-3.)
The product that you have purchased may not be
equipped with "Samba TV". In this case, this feature will
be added by way of a planned future software version
update.
When you change the network settings, refer to Smart TV
> Internet Setup > Internet Connection.
(See pages 9-2 to 9-4.)
Completed
11 The settings confirmation screen is displayed. Confirm
the information displayed on the screen, and then press
ENTER.
Examples of the settings confirmation screen
When one or more channel is received after "Antenna
& Cable" was selected in step 6 and a search was
carried out.
When no channel is received after "Antenna & Cable"
was selected in step 6 and a search was carried out.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
