>>
<<
Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)
ENG 5-9
Viewing 3D Images (Continue)
Receiving a 3D Image Signal That Cannot Be Detected
Automatically
1 Press 2D/3D.
A screen appears prompting you to select between 3D
and 2D image viewing.
2 Press
/ to select "3D" or "2D", and then press
ENTER.
To view in 3D mode: Select "3D", and then go to step
3.
To view in 2D mode: Select "2D", and then go to step
6.
3 Press
/ to select the 3D signal type
("2D
3D", "Side by Side" or "Top and Bottom") and
then press ENTER.
If you select the same system as that of the input
signal, 3D images are displayed.
4 Turn on the 3D Glasses and place them on your head.
5 You can now view 3D images.
Switching from 3D to 2D Mode
6 Press
/ to select the 2D signal type ( "Side by Side"
or "Top and Bottom") and then press ENTER.
If you select the same system as that of the input
signal, 2D images are displayed.
Take off the 3D Glasses and turn off the power.
This function can also be used by the SQ10U, EQ10U,
LE650U, C6500U and LE642U.
Ending 3D Image Viewing
7 Take off the 3D Glasses and turn off the power.
Watching 2D Images in 3D
You can convert normal 2D images into 3D images.
1 Press 2D/3D.
2 Press
/ to select "2D 3D", and then press ENTER.
3 Turn on the 3D Glasses and place them on your head.
NOTE
The TV returns to 2D mode after 1 hour has passed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
