7
E
Calibration
If black bands appear at the top and bottom or left and right of the screen, perform position adjustment so that the mouse cursor
correctly moves to the point that is touched.
* If black bands appear both at the top and bottom and at the left and right, the touch position is not correct. In this case, change
the display.
n
Calibration Method
Follow the steps below to congure the setting.
1. Click the touch display driver 2 icon (
) on the menu bar.
2. Click “Calibration”.
Auto
If black bands appear on the screen, position adjustment is automatically performed.
Select “Auto” and click on “Apply”.
Manual
If the automatically adjusted touch position is not correct, enter the display resolution (Width, Height) and click “Apply”.
To check the monitor resolution, touch “Input Select” in the menu screen of the touch display. The resolution will be shown in the
screen that appears.
For details, see the LCD MONITOR manual.
Touch Panel Settings
To Next Page
Loading...
Need help?
General
